Isolator fitness how to#
Isolator fitness software#

The Jotunheim’s phono card will work well with most moving magnet (MM) cartridges.Īdditional cards for Jotunheim may be released in the future. Note that the phono preamp’s gain is fixed at 42dB, input impedance is 47k, and load capacitance is 100pF. Also connect the turntable ground to the ground post with a short, sturdy wire. Using short, high-quality, well-shielded cables, connect the RCA outputs of your turntable to the RCA inputs on the Jotunheim.

If you chose Jotunheim 2 with the optional phono card, you’ll also need to connect your turntable.

Isolator fitness software#

Ensure the DAC is selected in both the OS and in any player software you are using-it may need to be selected both places to hear music.Use a high-quality, USB 2.0-rated cable of 2M or less in length.If you chose Jotunheim 2 with the optional DAC card, you’ll also need to connect your source to the DAC module.Turn on the amp, select the correct input, wait 15-20 seconds for the relay protection to engage the output, and enjoy.Connect your inputs and outputs (sources, headphones, powered monitors, power amp, you know, whatcha got).Plug it in with the supplied power cord.If you chose Jotunheim 2 as an amplifier only (no DAC or phono card), simply:.WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE TO RAIN OR MOISTURE.

Service is required when the device has been damaged, including cord or plug damage, liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture, does not operate normally, or has been dropped. Refer all servicing to qualified service personnel.To prevent electric shock, do not use the plug with an extension cord, receptacle, or outlet unless blades can be fully inserted.Unplug the cord from the outlet if the apparatus is unused for a long period of time. Route cords away from traffic areas and protect them from being pinched. Use only the supplied power cord or suitable replacement.Assure adequate ventilation, do not block any ventilation openings, or place near heat sources.Never use this device near water, and clean only with a dry cloth.

Isolator fitness how to#

If you don’t know how to install audio devices, get a qualified professional to help.

In any case, read these instructions before proceeding farther, follow all instructions, and heed all warnings. If you have some common sense, they should seem pretty straightforward. The following is required by the roughly 9,542 government agencies and regulations we have to comply with.

Featuring class-leading, unique, all-discrete design and super-high performance, Jotunheim 2 is ready for any headphone you can throw at it, while the ability to choose different internal cards means you are ready for today-and the future! WHAT’S IN THE BOX Jotunheim 2 combines our unique Nexus™ topology and Continuity S™ output stage with a modular architecture that allows you to configure it to your specific needs.